MARTEKENGINEERING & CONSULTANCY Discuss a project

Independent engineering consultancy

Engineering on your side of the table.

Martek’s architects, engineers and modellers support operators, EPC contractors, shipyards and specialist vendors on offshore, marine, modular and industrial projects. We deliver architectural and interior design, engineering studies, Revit and E3D models and design reviews, and we stay close to your team through engineering, procurement and fabrication.

REGISTERED · UAE MODELLING · REVIT / E3D WORKING LANGUAGES · EN / ES

Typical offshore platform, isometric view
CLIENTMARTEK ENGINEERING & CONSULTANCY
TITLETYPICAL PLATFORM · ISO
SCALENTS
DWGMEC-GA-001
REVA

01 · Clients

Operators, contractors and the vendors who supply them.

We work at every level of the supply chain, so we know what each party needs from the drawings, the models and the calculations.

A · OPERATORS

Oil & gas operators

  • ADNOC
  • Saudi Aramco
  • Eni
  • TotalEnergies
  • and other national and international oil companies

Owner’s engineering, design reviews and studies for new builds and brownfield modifications.

B · CONTRACTORS & YARDS

EPC contractors & shipyards

  • Technip
  • McDermott
  • L&T
  • Harker Solutions
  • and other fabrication and engineering contractors

Engineering capacity, Revit and E3D models, calculations and vendor coordination through engineering, procurement and fabrication.

C · SPECIALIST VENDORS

Marine & offshore suppliers

  • Intedam
  • Bagrod
  • and wall panel, furniture and equipment vendors

Product calculations, fire and thermal studies, and project-specific drawings and documents for approval.

SECTORSOil & gasOffshore wind & HVDCMarine & shipbuildingPower & E-housesIndustrial

02 · Services

Seven ways we support a project.

Take one service as a defined package, or combine several under a single point of contact for the life of the job.

  1. 01

    Engineering studies & calculations

    Structural, FEA, thermal, fire, HVAC and electrical calculations for offshore structures, modules and outfitting. Delivered as stand-alone studies or as part of a design package. See the study list.

    • Calculation reports
    • FEA models & plots
    • Thermal & fire studies
    • Load & heat schedules
  2. 02

    3D modelling & model coordination

    Revit and E3D models, from a single room to complete living quarters and technical buildings. We coordinate with the structural, piping and electrical models and resolve clashes before they reach the yard.

    • Revit & E3D models
    • Coordinated GA drawings
    • Clash reports
    • Model review comments
  3. 03

    Offshore & marine architecture

    Living quarters, technical buildings and outfitting for platforms, vessels and modules. Layouts, A- and H-class fire divisions, penetrations, escape routes and HVAC coordination to class and flag-state requirements.

    • GA & room layouts
    • Fire division plans
    • Penetration schedules
    • Door, window & finish schedules
  4. 04

    Architectural & interior design

    Interiors for living quarters, control rooms and technical buildings. We develop each space in 3D renderings, select the colours and finishes, detail the furniture and issue the drawings that yards and vendors build from.

    90107035101550147016 SAMPLE PALETTE · RAL
    • 3D renderings
    • Colour & finish schedules
    • Furniture details
    • Interior drawings
  5. 05

    Modular buildings & E-houses

    Prefabricated substations, E-houses, LERs and modular technical buildings. We handle module splits, lifting and transport limits, and the interfaces with electrical vendors.

    • Module GAs
    • Structural queries
    • BIM coordination
    • Interface registers
  6. 06

    Design review & owner’s engineering

    Independent reviews for operators and investors. FEED support, checks of contractor and vendor documents and models, technical due diligence and structured comment management.

    • Design review reports
    • Comment response sheets
    • Technical queries
    • Gap analyses
  7. 07

    Client-side EPF support

    HOW WE PREFER TO WORK

    An engineer embedded with your team through engineering, procurement and fabrication. We review vendor documents, evaluate bids, check shop drawings and walk the yard with you until the module ships.

    • Technical bid evaluations
    • Vendor document review
    • Shop drawing checks
    • Yard inspections & punch lists

03 · Studies

From a single study to a full model and its review.

Start with the calculation you need today. When the job grows, the same team builds the model and reviews it, so nothing is lost between stages.

STEP 1

Study

A focused calculation that answers one question, such as a support load, a fire rating or a room heat load.

STEP 2

Model

Full Revit or E3D models of rooms, modules and outfitting, built to your model standards and ready for coordination.

STEP 3

Review

Model coordination, clash review and design review against the codes, the specification and the vendor data.

REFSTUDYTYPICAL SCOPEOUTPUT
S-01Structural calculationsOutfitting supports, module and skid frames, wall and ceiling systems, lifting pointsCalculation report to Eurocode or DNV
S-02Finite element analysisStress, deflection and vibration of structures, panels and equipment supportsFEA report with model plots
S-03Thermal transmission, 2D & 3DTemperature distribution and heat flow through decks, bulkheads, penetrations and thermal bridgesIsotherm plots and heat-flow results
S-04Fire & fire protectionA- and H-class divisions, passive fire protection, fire-rated penetrations and escape routesFire study and division plans
S-05HVAC calculationsHeat loads, air change rates and room overpressure for living quarters and technical roomsHeat load and airflow schedules
S-06Thermal conductivityU-values and condensation risk of wall, ceiling and floor build-ups and panel systemsU-value and dew-point report
S-07Lighting & electricalLux levels, emergency lighting, small power and cable sizingLighting and cable calculations to BS 7671

04 · Projects

Selected projects.

Each reference gives the client, the asset, our scope and the size of the job in persons on board or floor area.

Add 3D rendering
P-01LIVING QUARTERS
PROJECT
add project name
CLIENT
add client
SCOPE
e.g. architectural & interior design
SIZE
POB
YEAR
year
Add 3D rendering
P-02TECHNICAL BUILDING
PROJECT
add project name
CLIENT
add client
SCOPE
e.g. Revit model & HVAC calculations
SIZE
m²
YEAR
year
Add 3D rendering
P-03VENDOR PACKAGE
PROJECT
add project name
CLIENT
add client
SCOPE
e.g. fire & thermal studies
SIZE
m²
YEAR
year

05 · Approach

Close to the client, from design office to fabrication yard.

On modular and offshore jobs, problems collect at the interfaces between disciplines, between client and vendor, and between drawing and yard. We place ourselves at those interfaces and stay there.

  1. STAGE 1

    FEED & concept

    • Layout studies
    • Design basis
    • Code & class strategy
  2. STAGE 2EPF

    Detailed engineering

    • Discipline coordination
    • Drawing & model reviews
    • Technical queries
  3. STAGE 3EPF

    Procurement

    • Technical specifications
    • Bid evaluation
    • Vendor clarifications
  4. STAGE 4EPF

    Fabrication

    • Shop drawing review
    • Yard inspections
    • Non-conformance follow-up
  5. STAGE 5

    Load-out & installation

    • Weight control
    • Interface checks
    • Site queries
  6. STAGE 6

    Handover

    • Punch list close-out
    • As-built review
    • Documentation dossier
ENGAGEMENT A

Defined package

A fixed scope with agreed deliverables, schedule and price. Suited to studies, design reviews and drawing packages.

ENGAGEMENT B

Call-off support

Engineering hours on demand against an agreed day rate and budget. Suited to workload peaks and urgent reviews.

ENGAGEMENT C

Resident engineer

A Martek engineer in your office, at the vendor or at the yard for the critical weeks of the job.

06 · Standards

Designed to the codes your project is certified against.

CODEAPPLIED TO
DNVOffshore substations, offshore structures and classification rules
NORSOKLiving quarters (C-001), architectural components (C-002), structural and safety standards
IMO / SOLAS · FTP CodeFire divisions, structural fire protection and fire test procedures for marine and offshore units
ASMEPressure equipment and piping interfaces
EurocodesStructural design of buildings and steelwork, EN 1990 to EN 1999
EN standardsFire classification (EN 13501), materials and building products
BS 7671Electrical installations in buildings and modules

07 · Team

Architects, engineers and modellers in one team.

Every discipline works in the same model, so architecture, structure and building services are coordinated before a drawing is issued.

ARCHITECTURE

Offshore & marine architects

Layouts, fire divisions, interiors, colour and finish selection, and furniture detailing for living quarters and technical buildings.

STRUCTURAL

Structural engineers

Calculations and FEA for supports, frames, modules and outfitting.

HVAC

HVAC engineers

Heat loads, airflow, room overpressure and duct coordination.

ELECTRICAL

Electrical engineers

Lighting, emergency lighting, small power and cable sizing.

MODELLING

Revit & E3D modellers

Experienced modellers who build models to your standards, coordinate them across disciplines and run clash reviews.

You work directly with the principal.

MICHAEL ALVAREZ · FOUNDER & PRINCIPAL CONSULTANT

Michael is a lead principal architect with a long track record in offshore, marine and industrial construction. He has led multidisciplinary teams on offshore HVDC substation platforms, accommodation modules, prefabricated E-houses and fire-rated industrial buildings.

He has lived and worked in the Netherlands, Spain, the United Arab Emirates and Malaysia, and runs projects in English and Spanish.

DISCIPLINES
Architecture, fire protection, modular design, BIM
CODES
DNV, NORSOK, SOLAS FTP, Eurocodes
LANGUAGES
English, Spanish

08 · Contact

Tell us about your project.

Send a short description and we will come back with questions or a proposed scope. It helps to include:

  1. Project, asset type and location
  2. Current stage: FEED, detailed design, procurement or fabrication
  3. The scope you need support with
  4. Key dates and the codes or class rules that apply
EMAIL
add email address
PHONE / WHATSAPP
add number
LINKEDIN
add company page
REGISTERED
United Arab Emirates
CLIENTS
Worldwide. Remote-first, with site and yard visits at key milestones.